Installation & hardware

Face terminals, door readers, the camera box, kiosk, signage, studio TV, printers, network and power-cut recovery.

• Install a Hikvision face terminal
  Put a face terminal on the gym network, connect it to Prism, and push your members to it so a face opens the door.
  Draft — screenshots coming
• Install a ZKTeco face terminal
  Connect a ZKTeco BioFace terminal to Prism. It dials out to us, so it works from any site with internet — but two menu settings decide whether it enforces membership expiry at all.
  Draft — screenshots coming
• Face terminals: Anviz / TIMY (cloud)
  Connect an Anviz / TIMY face terminal to Prism: add it by serial, type four values into the terminal's Comm menu, sync — then everything else is automatic, from anywhere.
  Draft — screenshots coming
• Enroll a Prism door reader
  Pair a Prism NFC/Bluetooth door reader with your gym over the reader's own setup Wi-Fi — no engineer, no typing device keys.
  Draft — screenshots coming
• AI camera box tiers and specs
  Essentials, Verified and Pro on-site: what each level of the AI camera box runs, the hardware behind it, and where your video stays.
  Draft — screenshots coming
• Install the AI camera box
  Plug the security box in, read the code on its screen, pair it from the app — no keyboard, no passwords. Plus Wi-Fi backup, a second network port, and moving or unpairing a box.
  Draft — screenshots coming
• Set up the member kiosk
  Install the kiosk app on an Android tablet, pair it with the 6-digit code, lock it down, set the staff PIN and test a USB card reader.
  Draft — screenshots coming
• Set up a signage screen
  Install the Prism Signage player on any Android TV box, pair it with a 6-digit claim code, and publish its first content with the guided setup wizard — all in a few minutes.
  Draft — screenshots coming
• Set up a studio TV
  Install the Prism Studio TV app on an Android TV box, pair it with the 6-digit claim code, and place it in a studio so it starts showing that room's classes.
  Draft — screenshots coming
• Set up receipt printers
  Connect thermal receipt printers over Wi-Fi, USB or the operating system, run a test print, and customise what your receipts say.
  Draft — screenshots coming
• Network and power
  How Prism devices use your network — outbound-only, no port forwarding — plus updates, remote health checks, and the power-cut recovery checklist.
  Draft — screenshots coming